ArgoUML User Manual
		Next

ArgoUML User Manual

A tutorial and reference description

Alejandro Ramirez

Philippe Vanpeperstraete

Andreas Rueckert

Kunle Odutola

Jeremy Bennett

Linus Tolke

Michiel van der Wulp

Copyright © 2004, 2005, 2006 Michiel van der Wulp

Copyright © 2003 Linus Tolke

Copyright © 2001, 2002 Jeremy Bennett

Copyright © 2001 Kunle Odutola

Copyright © 2000 Philippe Vanpeperstraete

Copyright © 2000 Alejandro Ramirez

Copyright © 2000 Andreas Rueckert

This material may be distributed only subject to the terms and conditions set forth in the Open Publication License, v1.0 or later. A copy of this license is included in the section Open Publication License. The latest version is presently available at http://www.opencontent.org/openpub/.

Abstract

This version of the manual is intended to describe the version 0.22 of ArgoUML.

Table of Contents

1. Introduction

1.1. Origins and Overview of ArgoUML

1.1.1. Object Oriented Analysis and Design
1.1.2. The Development of ArgoUML
1.1.3. Finding Out More About the ArgoUML Project

1.2. Scope of This User Manual

1.2.1. Target Audience
1.2.2. Scope

1.3. Overview of the User Manual

1.3.1. Tutorial Manual Structure
1.3.2. Reference Manual Structure
1.3.3. User Feedback

1.4. Assumptions

1. Tutorial

2. Introduction (being written)

3. UML Based OOA&D

3.1. Background to UML

3.2. UML Based Processes for OOA&D

3.2.1. Types of Process
3.2.2. A Development Process for This Manual

3.3. Why ArgoUML is Different

3.3.1. Cognitive Psychology
3.3.2. Open Standards
3.3.3. 100% Pure Java
3.3.4. Open Source

3.4. ArgoUML Basics

3.4.1. Getting Started
3.4.2. The ArgoUML User Interface
3.4.3. Output
3.4.4. Working With Design Critics

3.5. The Case Study (To be written)

4. Requirements Capture

4.1. Introduction

4.2. The Requirements Capture Process

4.2.1. Process Steps

4.3. Output of the Requirements Capture Process

4.3.1. Vision Document
4.3.2. Use Case Diagram
4.3.3. The Use Case Specification
4.3.4. Supplementary Requirement Specification

4.4. Using Use Cases in ArgoUML

4.4.1. Actors
4.4.2. Use Cases
4.4.3. Associations
4.4.4. Hierarchical Use Cases
4.4.5. Stereotypes
4.4.6. Documentation
4.4.7. System Boundary Box

4.5. Case Study

4.5.1. Vision Document
4.5.2. Identifying Actors and Use Cases
4.5.3. Associations (To be written)
4.5.4. Advanced Diagram Features (To be written)
4.5.5. Use Case Specifications (To be written)
4.5.6. Supplementary Requirements Specification (To be written)

5. Analysis

5.1. The Analysis Process

5.1.1. Class, Responsibilities, and Collaborators (CRC) Cards
5.1.2. Concept Diagram (To be written)
5.1.3. System Sequence Diagram (To be written)
5.1.4. System Statechart Diagram (To be written)
5.1.5. Realization Use Case Diagram (To be written)
5.1.6. Documents (To be written)

5.2. Class Diagrams (To be written)

5.2.1. The Class Diagram (To be written)
5.2.2. Advanced Class Diagrams (To be written)

5.3. Creating Class Diagrams in ArgoUML

5.3.1. Classes
5.3.2. Associations (To be written)
5.3.3. Class Attributes and Operations (To be written)
5.3.4. Advanced Class Features (To be written)

5.4. Sequence Diagrams (To be written)

5.4.1. The Sequence Diagram (To be written)
5.4.2. Identifying Actions (To be written)
5.4.3. Advanced Sequence Diagrams (To be written)

5.5. Creating Sequence Diagrams in ArgoUML

5.5.1. Sequence Diagrams
5.5.2. Actions (To be written)
5.5.3. Advanced Sequence Diagrams (To be written)

5.6. Statechart Diagrams (To be written)

5.6.1. The Statechart Diagram (To be written)
5.6.2. Advanced Statechart Diagrams (To be written)

5.7. Creating Statechart Diagrams in ArgoUML

5.7.1. Statechart Diagrams (To be written)
5.7.2. States (To be written)
5.7.3. Transitions (To be written)
5.7.4. Actions (To be written)
5.7.5. Advanced Statechart Diagrams (To be written)

5.8. Realization Use Cases (To be written)

5.9. Creating Realization Use Cases in ArgoUML (To be written)

5.10. Case Study (To be written)

5.10.1. CRC Cards
5.10.2. Concept Class Diagrams (To be written)
5.10.3. System Sequence Diagrams (To be written)
5.10.4. System Statechart Diagrams (To be written)
5.10.5. Realization Use Cases (To be written)

6.1. The Design Process (To be written)

6.1.1. Class, Responsibilities, and Collaborators (CRC) Cards
6.1.2. Package Diagram (To be written)
6.1.3. Realization Class Diagrams (To be written)
6.1.4. Sequence Diagrams and Collaboration Diagrams (To be written)
6.1.5. Statechart Diagrams and Activity Diagrams (To be written)
6.1.6. Deployment Diagram (To be written)
6.1.7. Documents (To be written)

6.2. Package Diagrams (To be written)

6.2.1. The Package Diagram (To be written)
6.2.2. Advanced Package Diagrams (To be written)

6.3. Creating Package Diagrams in ArgoUML

6.3.1. Packages
6.3.2. Relationships between packages (To be written)
6.3.3. Advanced Package Features (To be written)

6.4. More on Class Diagrams (To be written)

6.4.1. The Class Diagram (To be written)
6.4.2. Advanced Class Diagrams (To be written)

6.5. More on Class Diagrams in ArgoUML (To be written)

6.5.1. Classes (To be written)
6.5.2. Class Attributes and Operations (To be written)
6.5.3. Advanced Class Features

6.6. Sequence and Collaboration Diagrams (To be written)

6.6.1. More on the Sequence Diagram (To be written)
6.6.2. The Collaboration Diagram (To be written)
6.6.3. Advanced Collaboration Diagrams (To be written)

6.7. Creating Collaboration Diagrams in ArgoUML (To be written)

6.7.1. Collaboration Diagrams (To be written)
6.7.2. Messages (To be written)
6.7.3. Advanced Collaboration Diagrams (To be written)

6.8. Statechart Diagrams (To be written)

6.8.1. The Statechart Diagram (To be written)
6.8.2. Advanced Statechart Diagrams (To be written)

6.9. Creating Statechart Diagrams in ArgoUML (To be written)

6.9.1. Statechart Diagrams (To be written)
6.9.2. States (To be written)
6.9.3. Transitions (To be written)
6.9.4. Actions (To be written)
6.9.5. Advanced Statechart Diagrams (To be written)

6.10. Activity Diagrams (To be written)

6.10.1. The Activity Diagram (To be written)

6.11. Creating Activity Diagrams in ArgoUML (To be written)

6.11.1. Activity Diagrams (To be written)
6.11.2. Action States (To be written)

6.12. Deployment Diagrams (To be written)

6.12.1. The Deployment Diagram (To be written)

6.13. Creating Deployment Diagrams in ArgoUML (To be written)

6.13.1. Nodes (To be written)
6.13.2. Components (To be written)
6.13.3. Relationships between nodes and components (To be written)

6.14. System Architecture (To be written)

6.15. Case Study (To be written)

6.15.1. CRC Cards (To be written)
6.15.2. Packages (To be written)
6.15.3. Class Diagrams (To be written)
6.15.4. Sequence Diagrams (To be written)
6.15.5. Collaboration Diagrams (To be written)
6.15.6. Statechart Diagrams (To be written)
6.15.7. Activity Diagrams (To be written)
6.15.8. The Deployment Diagram (To be written)
6.15.9. The System Architecture (To be written)

7. Code Generation, Reverse Engineering, and Round Trip Engineering

7.1. Introduction

7.2. Code Generation

7.2.1. Generating Code from the Static Structure
7.2.2. Generating code from interactions and state machines

7.3. Code Generation in ArgoUML

7.3.1. Static Structure
7.3.2. Interactions and statechart diagrams

7.4. Reverse Engineering

7.5. Round-Trip Engineering

2. User Interface Reference

8. Introduction

8.1. Overview of the Window

8.2. General Mouse Behavior in ArgoUML

8.2.1. Mouse Button Terminology
8.2.2. Button??1 Click
8.2.3. Button??1 Double Click
8.2.4. Button??1 Motion
8.2.5. Shift and Ctrl modifiers with Button??1
8.2.6. Alt with Button??1: Panning
8.2.7. Ctrl with Button??1: Constrained Drag
8.2.8. Button??2 Actions
8.2.9. Button??2 Double Click
8.2.10. Button??2 Motion

8.3. General Information About Panes

8.3.1. Re-sizing Panes

8.4. The status bar

9. The Toolbar

9.1. File operations
9.2. Edit operations
9.3. View operations
9.4. Create operations

10. The Menu bar

10.1. Introduction

10.2. Mouse Behavior in the Menu Bar

10.3. The File Menu

10.3.1. New
10.3.2. Open Project...
10.3.3. Save Project
10.3.4. Save Project As...
10.3.5. Revert to Saved
10.3.6. Import XMI...
10.3.7. Export XMI...
10.3.8. Import Sources...
10.3.9. Page??Setup...
10.3.10. Print...
10.3.11. Export Graphics...
10.3.12. Export All Graphics...
10.3.13. Notation
10.3.14. Properties
10.3.15. Save Configuration
10.3.16. Most Recent Used Files
10.3.17. Exit

10.4. The Edit Menu

10.4.1. Select
10.4.2. Remove From Diagram
10.4.3. Delete From Model
10.4.4. Configure Perspectives...
10.4.5. Settings...

10.5. The View Menu

10.5.1. Goto Diagram...
10.5.2. Find...
10.5.3. Zoom
10.5.4. Adjust Grid
10.5.5. Adjust Grid Snap
10.5.6. Page Breaks

10.6. The Create Menu

10.6.1. New Use Case Diagram
10.6.2. New Class Diagram
10.6.3. New Sequence Diagram
10.6.4. New Collaboration Diagram
10.6.5. New Statechart Diagram
10.6.6. New Activity Diagram
10.6.7. New Deployment Diagram

10.7. The Arrange Menu

10.7.1. Align
10.7.2. Distribute
10.7.3. Reorder
10.7.4. Nudge
10.7.5. Set Preferred Size
10.7.6. Toggle Auto Resizing
10.7.7. Layout

10.8. The Generation Menu

10.8.1. Generate Selected Classes ...
10.8.2. Generate All Classes...
10.8.3. Generate Code for Project... (To be Written)
10.8.4. Settings for Generate for Project... (To be Written)

10.9. The Critique Menu

10.9.1. Toggle Auto-Critique
10.9.2. Design Issues...
10.9.3. Design Goals...
10.9.4. Browse Critics...

10.10. The Tools Menu

10.11. The Help Menu

10.11.1. System Information
10.11.2. About ArgoUML

11. The Explorer

11.1. Introduction

11.2. Mouse Behavior in the Explorer

11.2.1. Button??1 Click
11.2.2. Button??1 Double Click
11.2.3. Button??1 Motion
11.2.4. Button??2 Actions
11.2.5. Button??2 Double Click

11.3. Keyboard Behavior in the Explorer

11.4. Perspective Selection

11.5. Configuring Perspectives

11.5.1. The Configure Perspectives dialog

11.6. Context Sensitive Menu

11.6.1. Add to Diagram
11.6.2. Delete From Model
11.6.3. Set Source Path... (To be written)
11.6.4. Add Package
11.6.5. Add All Classes in Namespace

12. The Editing Pane

12.1. Introduction

12.2. Mouse Behavior in the Editing Pane

12.2.1. Button??1 Click
12.2.2. Button??1 Double Click
12.2.3. Button??1 Motion
12.2.4. Shift and Ctrl modifiers with Button??1
12.2.5. Alt with Button??1 motion
12.2.6. Button??2 Actions
12.2.7. Button??2 Double Click
12.2.8. Button??2 Motion

12.3. The tool bar

12.3.1. Layout Tools
12.3.2. Annotation Tools
12.3.3. Drawing Tools
12.3.4. Use Case Diagram Specific Tools
12.3.5. Class Diagram Specific Tools
12.3.6. Sequence Diagram Specific Tools
12.3.7. Collaboration Diagram Specific Tools
12.3.8. Statechart Diagram Specific Tools
12.3.9. Activity Diagram Specific Tools
12.3.10. Deployment Diagram Specific Tools

12.4. The Broom

12.5. Selection Action Buttons

12.6. Clarifiers

12.7. The Drawing Grid

12.8. The Diagram Tab

12.9. Pop-Up Menus

12.9.1. Critiques
12.9.2. Ordering
12.9.3. Add
12.9.4. Show
12.9.5. Modifiers
12.9.6. Multiplicity
12.9.7. Aggregation
12.9.8. Navigability

12.10. Notation

12.10.1. Notation Languages
12.10.2. Notation Editing on the diagram
12.10.3. Notation Parsing

13. The Details Pane

13.1. Introduction

13.2. To Do Item Tab

13.2.1. Wizards
13.2.2. The Help Button

13.3. Properties Tab

13.4. Documentation Tab

13.5. Presentation Tab

13.6. Source Tab

13.7. Constraints Tab

13.7.1. The Constraint Editor

13.8. Stereotype Tab

13.9. Tagged Values Tab

13.10. Checklist Tab

14. The To-Do Pane

14.1. Introduction

14.2. Mouse Behavior in the To-Do Pane

14.2.1. Button??1 Click
14.2.2. Button??1 Double Click
14.2.3. Button??2 Actions
14.2.4. Button??2 Double Click

14.3. Presentation Selection

14.4. Item Count

15. The Critics

15.1. Introduction

15.1.1. Terminology
15.1.2. Design Issues

15.2. Uncategorized

15.3. Class Selection

15.3.1. Wrap DataType
15.3.2. Reduce Classes in diagram <diagram>
15.3.3. Clean Up Diagram

15.4. Naming

15.4.1. Resolve Association Name Conflict
15.4.2. Revise Attribute Names to Avoid Conflict
15.4.3. Change Names or Signatures in an Artifact
15.4.4. Duplicate End (Role) Names for an Association
15.4.5. Role name conflicts with member
15.4.6. Choose a Name (Classes and Interfaces)
15.4.7. Choose a Unique Name for an Artifact (Classes and Interfaces)
15.4.8. Choose a Name (Attributes)
15.4.9. Choose a Name (Operations)
15.4.10. Choose a Name (States)
15.4.11. Choose a Unique Name for a (State related) Artifact
15.4.12. Revise Name to Avoid Confusion
15.4.13. Choose a Legal Name
15.4.14. Change an Artifact to a Non-Reserved Word
15.4.15. Choose a Better Operation Name
15.4.16. Choose a Better Attribute Name
15.4.17. Capitalize Class Name
15.4.18. Revise Package Name

15.5. Storage

15.5.1. Revise Attribute Names to Avoid Conflict
15.5.2. Add Instance Variables to a Class
15.5.3. Add a Constructor to a Class
15.5.4. Reduce Attributes on a Class

15.6. Planned Extensions

15.6.1. Operations in Interfaces must be public
15.6.2. Interfaces may only have operations
15.6.3. Remove Reference to Specific Subclass

15.7. State Machines

15.7.1. Reduce Transitions on <state>
15.7.2. Reduce States in machine <machine>
15.7.3. Add Transitions to <state>
15.7.4. Add Incoming Transitions to <artifact>
15.7.5. Add Outgoing Transitions from <artifact>
15.7.6. Remove Extra Initial States
15.7.7. Place an Initial State
15.7.8. Add Trigger or Guard to Transition
15.7.9. Change Join Transitions
15.7.10. Change Fork Transitions
15.7.11. Add Choice/Junction Transitions
15.7.12. Add Guard to Transition
15.7.13. Clean Up Diagram
15.7.14. Make Edge More Visible
15.7.15. Composite Association End with Multiplicity > 1

15.8. Design Patterns

15.8.1. Consider using Singleton Pattern for <class>
15.8.2. Singleton Stereotype Violated in <class>
15.8.3. Nodes normally have no enclosers
15.8.4. NodeInstances normally have no enclosers
15.8.5. Components normally are inside nodes
15.8.6. ComponentInstances normally are inside nodes
15.8.7. Classes normally are inside components
15.8.8. Interfaces normally are inside components
15.8.9. Objects normally are inside components
15.8.10. LinkEnds have not the same locations
15.8.11. Set classifier (Deployment Diagram)
15.8.12. Missing return-actions
15.8.13. Missing call(send)-action
15.8.14. No Stimuli on these links
15.8.15. Set Classifier (Sequence Diagram)
15.8.16. Wrong position of these stimuli

15.9. Relationships

15.9.1. Circular Association
15.9.2. Make <association> Navigable
15.9.3. Remove Navigation from Interface via <association>
15.9.4. Add Associations to <artifact>
15.9.5. Remove Reference to Specific Subclass
15.9.6. Reduce Associations on <artifact>
15.9.7. Make Edge More Visible

15.10. Instantiation

15.11. Modularity

15.11.1. Classifier not in Namespace of its Association
15.11.2. Add Elements to Package <package>

15.12. Expected Usage

15.12.1. Clean Up Diagram

15.13. Methods

15.13.1. Change Names or Signatures in <artifact>
15.13.2. Class Must be Abstract
15.13.3. Add Operations to <class>
15.13.4. Reduce Operations on <artifact>

15.14. Code Generation

15.14.1. Change Multiple Inheritance to interfaces

15.15. Stereotypes

15.16. Inheritance

15.16.1. Revise Attribute Names to Avoid Conflict
15.16.2. Remove <class>'s Circular Inheritance
15.16.3. Class Must be Abstract
15.16.4. Remove final keyword or remove subclasses
15.16.5. Illegal Generalization
15.16.6. Remove Unneeded Realizes from <class>
15.16.7. Define Concrete (Sub)Class
15.16.8. Define Class to Implement <interface>
15.16.9. Change Multiple Inheritance to interfaces
15.16.10. Make Edge More Visible

15.17. Containment

15.17.1. Remove Circular Composition
15.17.2. Duplicate Parameter Name
15.17.3. Two Aggregate Ends (Roles) in Binary Association
15.17.4. Aggregate End (Role) in 3-way (or More) Association
15.17.5. Wrap DataType

3. Model Reference

16. Top Level Artifact Reference

16.1. Introduction

16.2. The Model

16.2.1. Model Details Tabs
16.2.2. Model Property Toolbar
16.2.3. Property Fields For The Model

16.3. Datatype

16.3.1. Datatype Details Tabs
16.3.2. Datatype Property Toolbar
16.3.3. Property Fields For Datatype

16.4. Enumeration

16.4.1. Enumeration Details Tabs
16.4.2. Enumeration Property Toolbar
16.4.3. Property Fields For Enumeration

16.5. Stereotype

16.5.1. Stereotype Details Tabs
16.5.2. Stereotype Property Toolbar
16.5.3. Property Fields For Stereotype

16.6. Diagram

16.6.1. Diagram Details Tabs
16.6.2. Diagram Property Toolbar
16.6.3. Property Fields For Diagram

17. Use Case Diagram Artifact Reference

17.1. Introduction

17.1.1. ArgoUML Limitations Concerning Use Case Diagrams

17.2. Actor

17.2.1. Actor Details Tabs
17.2.2. Actor Property Toolbar
17.2.3. Property Fields For Actor

17.3. Use Case

17.3.1. Use Case Details Tabs
17.3.2. Use Case Property Toolbar
17.3.3. Property Fields For Use Case

17.4. Extension Point

17.4.1. Extension Point Details Tabs
17.4.2. Extension Point Property Toolbar
17.4.3. Property Fields For Extension Point

17.5. Association

17.6. Association End

17.7. Dependency

17.8. Generalization

17.8.1. Generalization Details Tabs
17.8.2. Generalization Property Toolbar
17.8.3. Property Fields For Generalization

17.9. Extend

17.9.1. Extend Details Tabs
17.9.2. Extend Property Toolbar
17.9.3. Property Fields For Extend

17.10. Include

17.10.1. Include Details Tabs
17.10.2. Include Property Toolbar
17.10.3. Property Fields For Include

18. Class Diagram Artifact Reference

18.1. Introduction

18.1.1. Limitations Concerning Class Diagrams in ArgoUML

18.2. Package

18.2.1. Package Details Tabs
18.2.2. Package Property Toolbar
18.2.3. Property Fields For Package

18.3. Datatype

18.4. Stereotype

18.5. Class

18.5.1. Class Details Tabs
18.5.2. Class Property Toolbar
18.5.3. Property Fields For Class

18.6. Attribute

18.6.1. Attribute Details Tabs
18.6.2. Attribute Property Toolbar
18.6.3. Property Fields For Attribute

18.7. Operation

18.7.1. Operation Details Tabs
18.7.2. Operation Property Toolbar
18.7.3. Property Fields For Operation

18.8. Parameter

18.8.1. Parameter Details Tabs
18.8.2. Parameter Property Toolbar
18.8.3. Property Fields For Parameter

18.9. Signal

18.9.1. Signal Details Tabs
18.9.2. Signal Property Toolbar
18.9.3. Property Fields For Signal

18.10. Reception (to be written)

18.11. Association

18.11.1. Three-way and Greater Associations and Association Classes
18.11.2. Association Details Tabs
18.11.3. Association Property Toolbar
18.11.4. Property Fields For Association

18.12. Association End

18.12.1. Association End Details Tabs
18.12.2. Association End Property Toolbar
18.12.3. Property Fields For Association End

18.13. Dependency

18.13.1. Dependency Details Tabs
18.13.2. Dependency Property Toolbar
18.13.3. Property Fields For Dependency

18.14. Generalization

18.15. Interface

18.15.1. Interface Details Tabs
18.15.2. Interface Property Toolbar
18.15.3. Property Fields For Interface

18.16. Abstraction

18.16.1. Abstraction Details Tabs
18.16.2. Abstraction Property Toolbar
18.16.3. Property Fields For Abstraction

19. Sequence Diagram Artifact Reference

19.1. Introduction

19.1.1. Limitations Concerning Sequence Diagrams in ArgoUML

19.2. Object

19.2.1. Object Details Tabs
19.2.2. Object Property Toolbar
19.2.3. Property Fields For Object

19.3. Stimulus

19.3.1. Stimulus Details Tabs
19.3.2. Stimulus Property Toolbar
19.3.3. Property Fields For Stimulus

19.4. Stimulus Call

19.5. Stimulus Create

19.6. Stimulus Destroy

19.7. Stimulus Send

19.8. Stimulus Return

19.9.1. Link Details Tabs
19.9.2. Link Property Toolbar
19.9.3. Property Fields For Link

20. Statechart Diagram Artifact Reference

20.1. Introduction

20.1.1. Limitations Concerning Statechart Diagrams in ArgoUML

20.2. State

20.2.1. State Details Tabs
20.2.2. State Property Toolbar
20.2.3. Property Fields For State

20.3. Action

20.3.1. Action Details Tabs
20.3.2. Action Property Toolbar
20.3.3. Property Fields For Action

20.4. Composite State

20.5. Concurrent Region

20.6. Submachine State

20.7. Stub State

20.8. Transition

20.8.1. Transition Details Tabs
20.8.2. Transition Property Toolbar
20.8.3. Property Fields For Transition

20.9. Event

20.9.1. Event Details Tabs
20.9.2. Event Property Toolbar
20.9.3. Property Fields For Event

20.10. Guard

20.10.1. Guard Details Tabs
20.10.2. Guard Property Toolbar
20.10.3. Property Fields For Guard

20.11. Pseudostate

20.11.1. Pseudostate Details Tabs
20.11.2. Pseudostate Property Toolbar
20.11.3. Property Fields For Pseudostate

20.12. Initial State

20.13. Final State

20.13.1. Final State Details Tabs
20.13.2. Final State Property Toolbar
20.13.3. Property Fields For Final State

20.14. Junction

20.15. Choice

20.16. Fork

20.17. Join

20.18. Shallow History

20.19. Deep History

20.20. Synch State

20.20.1. Synch State Details Tabs
20.20.2. Synch State Property Toolbar
20.20.3. Property Fields For Synch State

21. Collaboration Diagram Artifact Reference

21.1. Introduction

21.1.1. Limitations Concerning Collaboration Diagrams in ArgoUML

21.2. Classifier Role

21.2.1. Classifier Role Details Tabs
21.2.2. Classifier Role Property Toolbar
21.2.3. Property Fields For Classifier Role

21.3. Association Role

21.3.1. Association Role Details Tabs
21.3.2. Association Role Property Toolbar
21.3.3. Property Fields For Association Role

21.4. Association End Role

21.4.1. Association End Role Details Tabs
21.4.2. Association End Role Property Toolbar
21.4.3. Property Fields For Association End Role

21.5. Message

21.5.1. Message Details Tabs
21.5.2. Message Property Toolbar
21.5.3. Property Fields For Message

22. Activity Diagram Artifact Reference

22.1. Introduction

22.1.1. Limitations Concerning Activity Diagrams in ArgoUML

22.2. Action State

22.2.1. Action State Details Tabs
22.2.2. Action State Property ToolBar
22.2.3. Property fields for action state

22.3. Action

22.4. Transition

22.5. Guard

22.6. Initial State

22.7. Final State

22.8. Junction (Decision)

22.10. Join

22.11. ObjectFlowState

23. Deployment Diagram Artifact Reference

23.1. Introduction

23.1.1. Limitations Concerning Deployment Diagrams in ArgoUML

23.2.1. Node Details Tabs
23.2.2. Node Property Toolbar
23.2.3. Property Fields For Node

23.3. Node Instance

23.3.1. Node Instance Details Tabs
23.3.2. Node Instance Property Toolbar
23.3.3. Property Fields For Node Instance

23.4. Component

23.4.1. Component Details Tabs
23.4.2. Component Property Toolbar
23.4.3. Property Fields For Component

23.5. Component Instance

23.5.1. Component Instance Details Tabs
23.5.2. Component Instance Property Toolbar
23.5.3. Property Fields For Component Instance

23.6. Dependency

23.7. Class

23.8. Interface

23.9. Association

23.10. Object

23.11. Link

24. Built In DataTypes, Classes, Interfaces and Stereotypes

24.1. Introduction

24.1.1. Package Structure
24.1.2. Exposure in the model

24.2. Built In Datatypes

24.3. Built In Classes

24.3.1. Built In Classes From java.lang
24.3.2. Built In Classes From java.math
24.3.3. Built In Classes From java.net
24.3.4. Built In Classes From java.util

24.4. Built In Interfaces

24.5. Built In Stereotypes

A. Supplementary Material for the Case Study

A.1. Introduction

A.2. Requirements Documents (To be written)

A.2.1. Vision Document (To be written)
A.2.2. Use Case Specifications (To be written)
A.2.3. Supplementary Requirements Specification (To be written)

B. UML resources

B.1. The UML specs (To be written)

B.2. UML related papers (To be written)

B.2.1. UML action specifications (To be written)

B.3. UML related websites (To be written)

C. UML Conforming CASE Tools

C.1. Other Open Source Projects (To be written)
C.2. Commercial Tools (To be written)

D. The C++ Module

D.1. Modeling for C++

D.1.1. Class tagged values
D.1.2. Attribute tagged values
D.1.3. Parameters
D.1.4. Preserved sections

E. Limits and Shortcomings

E.1. Diagram Canvas Size
E.2. Missing functions

F. Open Publication License

F.1. Requirements On Both Unmodified And Modified Versions
F.2. Copyright
F.3. Scope Of License
F.4. Requirements On Modified Works
F.5. Good-Practice Recommendations
F.6. License Options
F.7. Open Publication Policy Appendix:

G. The CRC Card Methodology

G.1. The Card
G.2. The Group
G.3. The Session
G.4. The Process

List of Figures

3.1. The Waterfall Process
3.2. Effort Involved in the Steps of the Waterfall Process
3.3. Effort Involved in the Steps of an Iterative Process
3.4. Finding the Settings Wizard
3.5. Setting Language in the Appearance Pane
3.6. Initial ArgoUML window
3.7. Invoking Save??Project??As...
3.8. File Chooser Dialog
3.9. ArgoUML Window Having Saved FirstProject.zargo
3.10. ArgoUML Window Showing the Critic Item Revise??Package??Name??UntitledModel
3.11. ArgoUML Window Showing the Critic Wizard to Rename the Package
4.1. Basic use case diagram for an ATM system
4.2. Use case diagram for an ATM system showing navigation.
4.3. Use case diagram for an ATM system showing multiplicity.
4.4. Use case diagram for an ATM system showing include relationships.
4.5. Use case diagram for an ATM system showing an extend relationship.
6.1. Selecting the Interface tool
6.2. Interface artifact on the Class Diagram
6.3. Generalization on the Class Diagram tool bar
6.4. Generalization between two Interfaces.
8.1. Overview of the ArgoUML window
9.1. The Zoom slider on the Toolbar
10.1. The confirmation dialog for New.
10.2. The file selection dialog for Open??Project....
10.3. The warning dialog for Revert to Saved.
10.4. The confirmation dialog for Import XMI....
10.5. The dialog for Import??XMI....
10.6. The dialog for Export??XMI....
10.7. The file selection dialog for Import??Sources....
10.8. The diagram exceeds page size dialog.
10.9. The dialog for Properties - Notation: The User tab.
10.10. The dialog for Properties - Notation: The Notations tab.
10.11. The save changes dialog.
10.12. The dialog for confirmation of Remove from Model.
10.13. The dialog for Settings - Preferences.
10.14. The dialog for Settings - Environment.
10.15. The dialog for Settings - User.
10.16. The dialog for Settings - Appearance.
10.17. The dialog for Settings - Notations.
10.18. The dialog for Settings - C++.
10.19. The dialog for Goto Diagram....
10.20. The dialog for Find....
10.21. The dialog for Generate Selected Classes....
10.22. The dialog for Design??Issues....
10.23. The dialog for Design??Goals....
10.24. The dialog for Browse??Critics....
10.25. The dialog for System??Information.
10.26. The help window for ArgoUML
11.1. Overview of the explorer
11.2. The Configure Perspectives dialog box
12.1. Overview of the editing pane
12.2. The dialog for adding a new class diagram
12.3. The drawing tools selector.
12.4. The association tool selector.
12.5. The Broom.
12.6. Some examples of “Selection Action Buttons”.
12.7. A class in UML notation
12.8. A class in Java notation
12.9. A couple of associations with adornments
13.1. Overview of the details pane
13.2. Example of the To Do Item tab on the properties pane
13.3. Dialog box for New??To??Do??Item
13.4. Dialog box for Resolve??Item
13.5. Example of a Wizard
13.6. A typical Properties tab on the details pane
13.7. A typical Documentation tab on the details pane
13.8. A typical Presentation tab on the details pane
13.9. The Custom Fill/Line Color dialog box
13.10. The Custom Fill/Line Color dialog box
13.11. The Custom Fill/Line Color dialog box
13.12. The Source Tab of a class.
13.13. A C++ example.
13.14. A typical Constraints tab on the details pane
13.15. Dialog box for configuring constraints
13.16. Dialog box for configuring constraints
13.17. An example of a stereotype tab for a class.
13.18. An example of a checklist for a class.
14.1. Overview of the to-do pane
17.1. Possible artifacts on a use case diagram.
17.2. Example use of a discriminator with generalization
18.1. Possible artifacts on a class diagram.
18.2. Possible artifacts on a package diagram.
18.3. The “add/remove context” dialog box
18.4. The “Add/Remove Specifications” dialog box
19.1. Possible artifacts on a sequence diagram.
20.1. Statechart diagram artifacts 1.
20.2. Statechart diagram artifacts 2.
21.1. Possible artifacts on a collaboration diagram.
21.2. The “add context” dialog box
21.3. The “add predecessors” dialog box
22.1. Possible artifacts on an activity diagram.
23.1. Possible artifacts on a component diagram.
23.2. Possible artifacts on a deployment diagram.
24.1. Hierarchy of datatypes, classes and interfaces within ArgoUML

List of Tables

24.1. Stereotypes defined in UML 1.4 and ArgoUML

		Next
		Preface